Jumper Cable RF-Combination connectors of different connector series can be assembled as either straight or angle versions by using the corresponding clamps.With only one combination connector and the different cable clamps,a variety of connectors can be produced allowing a reduction in stock-levels.The technical specifications can be obtained from the descriptions in the respective chapters for each series.
Note: connector and cable type,length an be changed based on customer's requirements.
Interface
| According to | 7/16: DIN: IEC 60169-4 |
Electrial
| 1 | Characteristic Impedance | 50ohm |
| 2 | Frequency Range | DC-6GHz |
| 3 | VSWR | 1.15 |
| 4 | Dielectric withstanding voltage | ≥2500RMS,50Hz,at sea level |
| 5 | Dielectric Resistance | ≥5000MΩ |
| 6 | Contact Resistance | Outer Contact≤1.0mΩ ;Center Contact≤1.0mΩ |
Mechanical
| 1 | Durability |
Mating cycles ≥500 |
Material and plating
|
|
Description |
Material | Plating |
| 1 | Body | Brass | Tri-alloy/Ni |
| 2 | Insulator | PTFE | – |
| 3 | Center conductor | Brass | Ag |
| 4 | Other | Brass | Ni |
Environmental
| 1 | Temperature Range | -40℃~+85℃ |
